IEEE1394 camera
ML3743
Our new camlux ML3743 is optimized for laser beam analysis. In its standard version the CCD window is removed to avoid interference fringes.
An additional N/D filter wedge is placed in front of the CCD for protection. Its small pixel size and high dynamic range give a clear image of your laser beam especially of higher modes that could not be seen before. Comprehensive accessories extent the working range to almost all laser beam diameters, EUV-NIR wavelengths and all power/energy densities. The IEEE1394 interface is industry standard and therefore the camera can be used in production and quality control for reliable measurements.
Camera specifications:
| CCD-Sensor | 2/3” |
| Pixel # | 1392 x 1040 |
| Pixel size | 6.45 x 6.45 µm² |
| Array size | 8.97 x 6.71 mm² |
| max. frame rate | 14.8 fps |
| 60 fps with binning | |
| Exposure time | 20 µs - 1 s |
| long-time exposure | up to 20 min |
| Binning | x2, x4, x8 |
| S/N ratio | 63 dB |
| Dynamic | 12 bit |
| Full well capacity | 18000 e- |
| Laser beam diameter | < 5 mm |
| larger diameter with optional extension tubes. small diameters 5 µm –100 µm with optional near field lenses | |
| Size | 60 x 60 x 60 mm³ // 2,36 x 2,36 x 2,36 inch³ |
| Weight | 0.3 kg |
| Interface | IEEE1394 FireWire |
|
Working range |
|
| Wavelength range | 320 - 1100 nm |
|
with UV-converter |
110-320 nm |
| Saturation, CW | 800 µW/cm² @ 532 nm, 12 mW/cm² @ 1064 nm |
| with N/D 4.0 filter: 1 W/cm² | |
| with polarlux attenuator: >10.000 W/cm² | |
| minimum detectable signal |
< 3 nW/cm² |
|
Saturation, pulsed (20 ns, 1Hz) |
14 nJ/cm² @ 532 nm, 240 nJ/cm² @ |
| with N/D 4.0 filter: > 140 µJ/cm² | |
| with polarlux attenuator: >10 J/cm² | |
| minimum detectable signal | < 280 pJ/cm² |
| damage threshold | ca. 20 x saturation @ 320 – 400 nm |
| ca. 200 x saturation @ 400 – 1100 nm | |
Different options for adaptation to opto-mechanical components. C-
Mount adapter for objectives, stackable neutral density filters and
extension tubes
