USB2.0 Camera
A USB-Interface allows a flexible use at notebook, PC or embedded systems to control the digital camera (shutter, gain, brightness). An external power supply is not necessary. Digital trigger input and output are available.
The camera can easily be adapted to common opto-mechanical components.
Camera specifications:
| CCD-Sensor | 2/3” |
| Pixel # | 1392 x 1040 |
| Pixel size | 6.45 x 6.45 µm² |
| Array size | 8.97 x 6.71 mm² |
| max. frame rate | 15 fps |
| S/N ratio | 66 dB |
| Dynamic | 12 bit |
| Laser beam diameter | < 5 mm |
| larger diameter with optional extension tubes. small diameters 5 µm –100 µm with optional near field lenses | |
| Interface | USB 2.0 |
|
Working range |
|
| Wavelength range | 320 - 1100 nm |
|
with UV-converter |
110-320 nm |
| Saturation, CW | 800 µW/cm² @ 532 nm, 12 mW/cm² @ 1064 nm |
| with N/D 4.0 filter: 1 W/cm² | |
| with polarlux attenuator: >10.000 W/cm² | |
| minimum detectable signal |
< 3 nW/cm² |
|
Saturation, pulsed (20 ns, 1Hz) |
14 nJ/cm² @ 532 nm, 240 nJ/cm² @ |
| with N/D 4.0 filter: > 140 µJ/cm² | |
| with polarlux attenuator: >10 J/cm² | |
| minimum detectable signal | < 280 pJ/cm² |
| damage threshold | ca. 20 x saturation @ 320 – 400 nm |
| ca. 200 x saturation @ 400 – 1100 nm | |
Different options for adaptation to opto-mechanical components. C-
Mount adapter for objectives, stackable neutral density filters and
extension tubes
